Hydraulic Hole Punch Knockout Punches Set
Product features: Feature: 1. All tools can be controlled by one key-press the trigger to start working, half loosing the trigger means stop forcing pressure, loosing fully means piston return to the original position. 2. LCD Data Display-The Total Crimping Times, Electricity Power, Errors Info...
1. All tools can be controlled by one key-press the trigger to start working, half loosing the trigger means stop forcing pressure, loosing fully means piston return to the original position.
2. LCD Data Display-The Total Crimping Times, Electricity Power, Errors Info can be checked by the Display,also we can special making for customer to show the pressure if necessary.
3. Air Cooling Heat dissipation system to extend using.
4. Heads Rotates 350 degree in order to gain better access to tight corners or other difficult working areas
5. Li-ion batteries do neither have a memory effect nor self-discharge. Even after long periods of non operation the tool is always ready to operate. In addition we see a lower power weight ratio with 50% more capacity and shorter charging cycles copare to NiMH batteries.
6. The unit is equipped with a double piston pump which is characterised by a rapid approach of the dies forwards the connector and a slow crimping motion
7. USD connect to memory crimping time
Zupper's hole punch and molds are compact, efficient, easy to use and simple to use. They are perfect for opening holes in panels for narrow electrical boxes, power distribution cabinets or distribution panels. The unique corner cutting die adopts high-strength alloy steel and high hardness surface treatment, so that the die has a longer service life.EZ-6AL has high flexibility 360° rotating head, an integrated pressure sensor increases the service life of the hole punch, automatic stop makes the punching tools last longer, if you need to knockout, drill, cut or punch,you know you will make it with ZUPPER.
Product details:TECHNICAL DATA
Crimping force: 60KN
Weight of tool:2.25kg
Size of tool:392x116x75
Thread of piston:3/4-19UN
Time/charge:250times(Max.mild steel 3mm,dia49.6mm)
Voltage of battery: 18V
sealing ring of cylinder:1set
sealing ring of safety valve:1set
3.5mm mild steel:Max.punching hole 61.5mm(pipe conduct 2")
2mm mild steel:Max punching hole161.9mm( pipe conduct 2")
2mm stainless steel:Max punching hole 61.5mm( pipe conduct 2")