Knowledge
Home > Knowledge > Content
One of connection method of wire and wiring pile head
- Dec 13, 2018 -

Method for connecting aluminum core multi-single strand wire and equipment bolt crimping type connection pile head


1. Select the appropriate aluminum lug according to the thickness of the core wire. 

2. Brush the oxide layer on the surface of the core wire and evenly apply the Vaseline zinc powder paste. 

3. Brush the oxide layer on the inner wall of the lug socket, and preferably apply Vaseline zinc powder paste on the inner wall. 

4. Insert the core wire into the wire insertion hole of the wiring ear and insert it into the bottom of the hole. 

5. Select the appropriate wire mold, press two pits on the front of the wire ear, press the outer pit first, then press the pit, the two pits should be in a straight line. 

6. Wrap the insulation tape between the root of the wiring ear and the wire stripping insulation layer (the insulation tape should be wrapped from the wire insulation layer. 

7. Brush the oxide layer on the back of the lug and evenly apply the Vaseline zinc powder paste. 

8. Put the back of the lug down, put it on the screw of the terminal, and then put on the flat washer and spring washer in turn, and fix it tightly with the nut.